ECT3000

Circuit Testers

Buy Now

Introduction

We designed the ECT3000 as a quick solution to your automotive circuit problems. The ECT3000 consists of 2 main components. An Intelligent transmitter and a Intelligent receiver along with a set of connection adapters that will help you :

  • Locate short circuits without unnecessarily removing plastic panels, molding, and carpet.
  • Trace wires to see where they lead
  • Find open circuits, switches or breaks in wires
  • Trace and locate the cause of a severe battery drain
  • Test and find intermittent conditions
  • Check continuity with the assistance of the Power Probe III, IV, or Hook

These features are extremely handy for the professional technician. An appropriate schematic or wiring diagram is always useful and many times necessary when tracing circuits. The better you understand your circuit, the better the ECT3000 can assist you.

Features

  • Locate short circuits without removing plastic panels, molding, and carpet.
  • Find short to ground circuits, switches, or breaks in wires.
  • Test and find intermittent conditions.
  • Sensitivity adjustment from 1-8 in (3-20 cm).
  • Trace short to ground wires with visual navigation & sound indicators.
  • Works on Cars, Boats, RV’s, Light Duty, Heavy Duty Trucks, and Trailers.
TRANSMITTER
Min Operating Voltage 12 VDC
Max Operating Voltage 24 VDC
Working Current <200mA
Working Frequency 4KHz
Max Operating Temp 50°C
Max Storage Temp 70°C
Max Operating Relative humidity 80% (Non-condensation)
Max Storage Relative humidity 80% (Non-condensation)
Altitude <2000m
RECEIVER
Power Supply 2 X 1.5V AAA
Working Current When not signal be detected <15mA
Power Consumption When Power Off <10uA
Max Operating Temp 50°C
Max Storage Temp 70°C
Max Operating Relative humidity 80% (Non-condensation)
Max Storage Relative humidity 80% (Non-condensation)
Altitude <2000m