Power Probe PPDCM80 Clamp Meter with Non-contact Voltage

Introduction

The Power Probe Digital Clamp Meter is an 80amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter’s diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Features

Voltage: AC 600V DC 600V
Current: AC 80A DC 80A
Display 4000 counts
Jaw Opening 24mm/0.9”
Auto & Manual Ranging
Auto Power Off
Non-Contact Voltage Detector
Diode Open Voltage 3.2V
Continuity Buzzer <50Ω
Data Hold
Large LCD Display Backlight
Work Light
Low Battery Display

Auto-range	Yes
Overload protection	CAT III 600V
Max. voltage between ter- minals and earth ground	600V DC or AC
Operating altitude	≦2000m(6500ft.)
Display	3 3/4 digit LCD display
Max. reading	4000
Polarity Indication	display automatically shows “-”
Over-range Indication	display shows “OL” or “-OL”
Power	3 x 1.5V AAA Batteries
Low Battery Indication	“ ” will appear on the display.
Temperature coefficient	less than 0.1 x accuracy/°C
Operating temperature	18°C~28°C (64°F~84°F)
Storage temperature	-10°C~50°C (14°F~122°F)
Operating Humidity	<80%
Operating Environment	Indoor Use
Pollution degree	2
Dimensions	195x80x45mm
Weight	approx. 195g (including batteries)